Total Visitors

Popup

Advertisement.

TransHimalaya.in

Everest Helicopter Tour for a day

Book exciting packages at www.transhimalaya.in

Tuesday, May 8, 2012

KNITTING ON JUTE MATT

                                               
         VILLAGE LIFE




                CRANES
                                         


                                                 WORKING INSTRUCTIONS


GETTING STARTED:-   Before starting embroidery, flatten out the canvas to remove creases.

HOW TO STITCH :-

 1. This picture is worked in simple long stitches throughout. Begin by threading the needle with all six strands of an appropriate color of thread.

2. Insert needle from the reverse of the canvas to the front of the canvas.

3. Leave a 1" long tail on the reverse of the canvas and hold it down against the canvas.

4. Work simple long stitches, making sure that the first several stitches cover and secure the tail on the reverse as indicated in Fig. (Click on image to enlarge)





Here is the video..
                                 


FILLING AN AREA:-

1. Work the stitches vertically except in areas marked (------>), where the stitches are worked horizontally.

2. The printed outline of the design differentiated between two areas of color. Therefore the holes on the outline between two areas should be used for both the areas. This will ensure that there are no gaps and the canvas will be completely filled up as indicated in Fig. (Click on image to enlarge)


Here is the video..



3. To prevent soiling of your work, I recommend that you commence embroidery with the dark shades first, and finish with lighter ones.

FINISHING:-


1. To finish, weave the thread through the back of the stitches already worked and snip off.

2. Once finished, turn the canvas and press with an iron on the wrong side. Do not slide the iron on the canvas as the threads may get disturbed. Instead, lift and press to flatten canvas and secure stitches in place.

3.An embroidered piece may be dry-cleaned but under no circumstances should it be hand/machine washed.

4. Frame as desired, depending on the decor and location of the room.

TIPS:-

1. To ensure an even tension of work, it is important to work the design as directed, so that you have simple long straight stitches in front and on the reverse of the canvas. Do not work back stitch on the reverse.

2. Work with fairly short lengths of thread to avoid knotting and tangling of thread. If your thread gets twisted, then hold the canvas and let the needle  drop, the thread will untwist.

3. Do not pass long threads from one place to another, especially dark colors behind light colors, as the thread will show trough. It is better to finish of and start a fresh.





- Pinx...

Monday, October 17, 2011

Dense Button Design

                                                    DENSE BUTTON DESIGN
                  Photo No:1                          


                   Photo No:2
                                 

                   Video No:1
                                 


FOR KIDS:


STEP 1.   (a) For Kids-Below 3yrs - 60 stitches
                 (b) For kids - above 3yrs - 75-80 stitches approx
                 (c) For 20-25 yrs - -85-90 stitches

STEP 2.  After this procedure, You have to stitch two lines..one is straight stitch line and another is opposite stitch line.

STEP 3. Make Border line about 5inches.

STEP 4.After that add 10-15 stitches with simple design.

STEP 5. Start your Design pattern. Make it 8inch+4inch approx.

STEP 6. Close or bind off 3 stitches from both the sides.

STEP7. After 2-3 rows or 4inch..leave the stitches in center for neck line.

STEP 8. If u want to make V-Neck line then leave one stitch in center or for Round neck leave 
               10 stitch .close them or (bind off) pin them and leave those 10 stitches.

STEP 9. After this make 8inch more, in separate knitting needles.

STEP 10.After this for SHOULDERS, in both the knitting needle take only 22-22 stitches and      remaining (bind them).

STEP 11.Join the sides of both flap front and back. Make sure it is correct joined or not.

STEP 12For ARMS ( side) raise 80 stitches (for sleeveless).

STEP 13For NECK (Center ) raise 110 stitches. (Mention that - raise neck stitches only when shoulder side stitches joined or raised). Which one is yr border Design same will be yr neck design also..:- This whole procedure is for sleeveless

                                               For sleeves:
 (i) Make border of thin wool- 40 stitch  and for thick wool 35 stitches. (same as front part we have done)
(ii) After 4inch, add 10 stitches more to them.
(iii) In first line of the knitting needle 1 stitch is added..
    then  after2 rowx 1
            4x1
            6x1 (approx)
           max 80-85 stitches. not more than that..  

FOR ADULTS:

STEP 1. Border: 110 front back both.

STEP 2. After 5 inch add 10 stitches = 120-125 stitches.
STEP 3. After 16inches 4 inch close or bind off 3 stitches from both the sides. (or u can measure with           yr waist line)

STEP 4. After that make 8inch+4inch more.

STEP 5.For neck- in center leave 12 stitches (for round neck)/ In this design prefer V- NECK.

STEP 6.For neck- raise 160 stitches.

STEP 7.For shoulder : for thin wool 32-32 stitches in both separate knitting needle
                          for thick wool 30/5 -30 stitches as well

STEP 7. For shoulder- raise 110 stitches.

STEP 8. For v- neck: in center leave 1 stitch. and raise 40-45stitches on back portion and 70-75stitches             on both of the front part.

STEP 9. For Sleeves: Border 50-55
                       after that add 15 stitches
                       And same procedure as kids - 1x1, 2x1....

 Use this design all over the sweater...

and your sweater is ready..



- Pinx...

Saturday, October 15, 2011

mehandi designs karwa chauth special

mehandi designs karwa chauth special
Happy karwa chauth to my dear friends...

















- Pinx...

Friday, October 7, 2011

Spiral Ladders

SPIRAL LADDER SWEATER DESIGNS

                 
                   Video no:1
                                 
                                 
(This design u can use in males sweater)
FOR KIDS:


STEP 1.   (a) For Kids-Below 3yrs - 60 stitches

                 (b) For kids - above 3yrs - 75-80 stitches approx
                 (c) For 20-25 yrs - -85-90 stitches

STEP 2.  After this procedure, You have to stitch two lines..one is straight stitch line and another is opposite stitch line.

STEP 3. Make Border line about 5inches.

STEP 4.After that add 10-15 stitches with simple design.

STEP 5. Start your Design pattern. Make it 8inch+4inch approx.

STEP 6. Close or bind off 3 stitches from both the sides.

STEP7. After 2-3 rows or 4inch..leave the stitches in center for neck line.

STEP 8. If u want to make V-Neck line then leave one stitch in center or for Round neck leave 
               10 stitch .close them or (bind off) pin them and leave those 10 stitches.

STEP 9. After this make 8inch more, in separate knitting needles.

STEP 10.After this for SHOULDERS, in both the knitting needle take only 22-22 stitches and      remaining (bind them).

STEP 11.Join the sides of both flap front and back. Make sure it is correct joined or not.

STEP 12For ARMS ( side) raise 80 stitches (for sleeveless).

STEP 13For NECK (Center ) raise 110 stitches. (Mention that - raise neck stitches only when shoulder side stitches joined or raised). Which one is yr border Design same will be yr neck design also..:- This whole procedure is for sleeveless

                                               For sleeves:
 (i) Make border of thin wool- 40 stitch  and for thick wool 35 stitches. (same as front part we have done)
(ii) After 4inch, add 10 stitches more to them.
(iii) In first line of the knitting needle 1 stitch is added..
    then  after2 rowx 1
            4x1
            6x1 (approx)
           max 80-85 stitches. not more than that..  

FOR ADULTS:

STEP 1. Border: 110 front back both.

STEP 2. After 5 inch add 10 stitches = 120-125 stitches.
STEP 3. After 16inches 4 inch close or bind off 3 stitches from both the sides. (or u can measure with           yr waist line)

STEP 4. After that make 8inch+4inch more.

STEP 5.For neck- in center leave 12 stitches (for round neck)/ In this design prefer V- NECK.

STEP 6.For neck- raise 160 stitches.

STEP 7.For shoulder : for thin wool 32-32 stitches in both separate knitting needle
                          for thick wool 30/5 -30 stitches as well

STEP 7. For shoulder- raise 110 stitches.

STEP 8. For v- neck: in center leave 1 stitch. and raise 40-45stitches on back portion and 70-75stitches             on both of the front part.

STEP 9. For Sleeves: Border 50-55
                       after that add 15 stitches
                       And same procedure as kids - 1x1, 2x1....

 Use this design in front side  (not in sleeves )

and your sweater is ready..


- Pinx...

Tuesday, October 4, 2011

Multi-color Blocks

                                                     MULTI-COLOR BLOCKS

                  Photo No: 1


                  Photo No:2
                         
                          Video      

(This Design will look nice in kids sweater)  
                               
FOR KIDS:


STEP 1.   (a) For Kids-Below 3yrs - 60 stitches

                 (b) For kids - above 3yrs - 75-80 stitches approx
                 (c) For 20-25 yrs - -85-90 stitches

STEP 2.  After this procedure, You have to stitch two lines..one is straight stitch line and another is opposite stitch line.

STEP 3. Make Border line about 5inches.

STEP 4.After that add 10-15 stitches with simple design.

STEP 5. Start your Design pattern. Make it 8inch+4inch approx.

STEP 6. Close or bind off 3 stitches from both the sides.

STEP7. After 2-3 rows or 4inch..leave the stitches in center for neck line.

STEP 8. If u want to make V-Neck line then leave one stitch in center or for Round neck leave 
               10 stitch .close them or (bind off) pin them and leave those 10 stitches.

STEP 9. After this make 8inch more, in separate knitting needles.

STEP 10.After this for SHOULDERS, in both the knitting needle take only 22-22 stitches and      remaining (bind them).

STEP 11.Join the sides of both flap front and back. Make sure it is correct joined or not.

STEP 12For ARMS ( side) raise 80 stitches (for sleeveless).

STEP 13For NECK (Center ) raise 110 stitches. (Mention that - raise neck stitches only when shoulder side stitches joined or raised). Which one is yr border Design same will be yr neck design also..:- This whole procedure is for sleeveless

                                               For sleeves:
 (i) Make border of thin wool- 40 stitch  and for thick wool 35 stitches. (same as front part we have done)
(ii) After 4inch, add 10 stitches more to them.
(iii) In first line of the knitting needle 1 stitch is added..
    then  after2 rowx 1
            4x1
            6x1 (approx)
           max 80-85 stitches. not more than that..  

FOR ADULTS:

STEP 1. Border: 110 front back both.

STEP 2. After 5 inch add 10 stitches = 120-125 stitches.
STEP 3. After 16inches 4 inch close or bind off 3 stitches from both the sides. (or u can measure with           yr waist line)

STEP 4. After that make 8inch+4inch more.

STEP 5.For neck- in center leave 12 stitches (for round neck)/ In this design prefer V- NECK.

STEP 6.For neck- raise 160 stitches.

STEP 7.For shoulder : for thin wool 32-32 stitches in both separate knitting needle
                          for thick wool 30/5 -30 stitches as well

STEP 7. For shoulder- raise 110 stitches.

STEP 8. For v- neck: in center leave 1 stitch. and raise 40-45stitches on back portion and 70-75stitches             on both of the front part.

STEP 9. For Sleeves: Border 50-55
                       after that add 15 stitches
                       And same procedure as kids - 1x1, 2x1....

 Use this design in front side and back side also (not in sleeves )

and your sweater is ready..


- Pinx...

Wednesday, September 28, 2011

Multi waves Design

                                         MULTI WAVES SWEATER DESIGN No:4  

                  Photo no:1

                                            (Click on Image to enlarge)

                  Photo no:2
                                  
                                 (U can use this design in single, two or different colors)

Here is the video..
   
It will look cool in ladies koti or kids sweater(Use white and blue combination,full sweater)
                              
FOR KIDS:


STEP 1.   (a) For Kids-Below 3yrs - 60 stitches

                 (b) For kids - above 3yrs - 75-80 stitches approx
                 (c) For 20-25 yrs - -85-90 stitches

STEP 2.  After this procedure, You have to stitch two lines..one is straight stitch line and another is opposite stitch line.

STEP 3. Make Border line about 5inches.

STEP 4.After that add 10-15 stitches with simple design.

STEP 5. Start your Design pattern. Make it 8inch+4inch approx.

STEP 6. Close or bind off 3 stitches from both the sides.

STEP7. After 2-3 rows or 4inch..leave the stitches in center for neck line.

STEP 8. If u want to make V-Neck line then leave one stitch in center or for Round neck leave 
               10 stitch .close them or (bind off) pin them and leave those 10 stitches.

STEP 9. After this make 8inch more, in separate knitting needles.

STEP 10.After this for SHOULDERS, in both the knitting needle take only 22-22 stitches and      remaining (bind them).

STEP 11.Join the sides of both flap front and back. Make sure it is correct joined or not.

STEP 12For ARMS ( side) raise 80 stitches (for sleeveless).

STEP 13For NECK (Center ) raise 110 stitches. (Mention that - raise neck stitches only when shoulder side stitches joined or raised). Which one is yr border Design same will be yr neck design also..:- This whole procedure is for sleeveless

                                               For sleeves:
 (i) Make border of thin wool- 40 stitch  and for thick wool 35 stitches. (same as front part we have done)
(ii) After 4inch, add 10 stitches more to them.
(iii) In first line of the knitting needle 1 stitch is added..
    then  after2 rowx 1
            4x1
            6x1 (approx)
           max 80-85 stitches. not more than that..  

FOR ADULTS:

STEP 1. Border: 110 front back both.

STEP 2. After 5 inch add 10 stitches = 120-125 stitches.
STEP 3. After 16inches 4 inch close or bind off 3 stitches from both the sides. (or u can measure with           yr waist line)

STEP 4. After that make 8inch+4inch more.

STEP 5.For neck- in center leave 12 stitches (for round neck)/ In this design prefer V- NECK.

STEP 6.For neck- raise 160 stitches.

STEP 7.For shoulder : for thin wool 32-32 stitches in both separate knitting needle
                          for thick wool 30/5 -30 stitches as well

STEP 7. For shoulder- raise 110 stitches.

STEP 8. For v- neck: in center leave 1 stitch. and raise 40-45stitches on back portion and 70-75stitches             on both of the front part.

STEP 9. For Sleeves: Border 50-55
                       after that add 15 stitches
                       And same procedure as kids - 1x1, 2x1....

 Use this design in front side and back side also (not in sleeves )

and your sweater is ready..


- Pinx...

Butterfly Design


ORANGE BUTTERFLY DESIGN No:3

Photo no. 1
 


                    video no 1
                                 
                                    
                                                               (First step)


                      video no2:
                                                           (Step second)

                    video no3:
                                                         (Third step)
This design is specially for kids..

FOR KIDS:


STEP 1.   (a) For Kids-Below 3yrs - 60 stitches

                 (b) For kids - above 3yrs - 75-80 stitches approx
                 (c) For 20-25 yrs - -85-90 stitches

STEP 2.  After this procedure, You have to stitch two lines..one is straight stitch line and another is opposite stitch line.

STEP 3. Make Border line about 5inches.

STEP 4.After that add 10-15 stitches with simple design.

STEP 5. Start your Design pattern. Make it 8inch+4inch approx.

STEP 6. Close or bind off 3 stitches from both the sides.

STEP7. After 2-3 rows or 4inch..leave the stitches in center for neck line.

STEP 8. If u want to make V-Neck line then leave one stitch in center or for Round neck leave 
               10 stitch .close them or (bind off) pin them and leave those 10 stitches.

STEP 9. After this make 8inch more, in separate knitting needles.

STEP 10.After this for SHOULDERS, in both the knitting needle take only 22-22 stitches and      remaining (bind them).

STEP 11.Join the sides of both flap front and back. Make sure it is correct joined or not.

STEP 12For ARMS ( side) raise 80 stitches (for sleeveless).

STEP 13For NECK (Center ) raise 110 stitches. (Mention that - raise neck stitches only when shoulder side stitches joined or raised). Which one is yr border Design same will be yr neck design also..:- This whole procedure is for sleeveless

                                               For sleeves:
 (i) Make border of thin wool- 40 stitch  and for thick wool 35 stitches. (same as front part we have done)
(ii) After 4inch, add 10 stitches more to them.
(iii) In first line of the knitting needle 1 stitch is added..
    then  after2 rowx 1
            4x1
            6x1 (approx)
           max 80-85 stitches. not more than that..  

FOR ADULTS:

STEP 1. Border: 110 front back both.

STEP 2. After 5 inch add 10 stitches = 120-125 stitches.
STEP 3. After 16inches 4 inch close or bind off 3 stitches from both the sides. (or u can measure with           yr waist line)

STEP 4. After that make 8inch+4inch more.

STEP 5.For neck- in center leave 12 stitches (for round neck)/ In this design prefer V- NECK.

STEP 6.For neck- raise 160 stitches.

STEP 7.For shoulder : for thin wool 32-32 stitches in both separate knitting needle
                          for thick wool 30/5 -30 stitches as well

STEP 7. For shoulder- raise 110 stitches.

STEP 8. For v- neck: in center leave 1 stitch. and raise 40-45stitches on back portion and 70-75stitches             on both of the front part.

STEP 9. For Sleeves: Border 50-55
                       after that add 15 stitches
                       And same procedure as kids - 1x1, 2x1....

 Use this design only in front side (not in sleeves or backside). 

and your sweater is ready..





- Pinx...